ÃÐ-03Ì gas mixtures generator

 

 The generator is designed for making gas mixtures by dynamic dilution of attested primary mixes with attested diluent gas (air or nitrogen).

 The instrument is used for calibration and check-up of gas analyzers in the process of their manufacture, operation, and maintenance. It can also be used when carrying out research works for making binary gas mixtures with volumetric part of the components rated 10-2 – 10-6 % provided that volumetric part of the component rated in the primary gas mixtures is less than 1 %.

The use of generators of five versions allows to make mixtures of nitrogen oxide with air or nitrogen (mod.344 ÃÐ 03Ì); methane or propane with air or nitrogen (mod.623 ÃÐ 03Ì); nitrogen oxide or dioxide with air or nitrogen (mod.645 ÃÐ 03Ì); sulphur dioxide with air or nitrogen (mod.667 ÃÐ 03Ì); hydrogen sulphide with air or nitrogen (mod.666 ÃÐ 03Ì).

The original design of gas circuit allows excluding the influence of ambient temperature changes from 10 to 35°C and atmospheric pressure changes from 84 to 106,7 kPa on the quantitative content of output gas mixture.

Generator doesn't require electrical supply that allows its usage in explosion risk areas.

The instrument is simple and reliable in use, is characterized by high metrological qualities  (the permissible relative error limit is not more than ± 5 % and for 623 ÃÐ 03Ì model it is not more than    ±4 %; dilution ratio permissible relative error values limit is not more than ± 3 %).

Specifications

Rated component concentration in 

 

the mixtures prepared, mg/m3 (discrete in range): 

 

nitrogen oxide (mod.344ÃÐ 03Ì)      

 3 …1100

methane (mod.623ÃÐ 03Ì)

 1 … 600

propane (mod.623ÃÐ 03Ì)

 1 … 1800

nitrogen oxide or dioxide (mod.645ÃÐ 03Ì)

 0,08 … 300

sulphur dioxide (mod.667ÃÐ 03Ì)

 0,08 … 800

hydrogen sulphide (mod.666ÃÐ 03Ì)

 0,3 … 1400

Productivity, l/min, not more than

 3

Dimensions, mm

 315 x 177 x 215

Weight, kg

 6

A list of instruments allocated on this site

On the questions of instruments purchasing , warranty and afterwarranty Service please turn to "ZAT Ukranalyt" (Allukrainian institute for analytical instrumentation) on Address : 
6, Tverska str, 03150, Kyiv, Ukraine
tel. +38044-529 - 62 - 13, fax +38044-502 - 13 - 68,
Our e-mail for requests:E-mail: analyt@ukranalyt.com.ua
or contact to the official sales representative – KSM - 05 Ltd.
 
Tel.:
(38 044) - (502 - 13 - 53), Fax: (38 044) - (502 - 13 - 59).
E-mail: ksm05@ukr.net


Home page